FlexiTex
Apply @ 8sqm/L per coat
– Water based Exterior
– Low sheen acrylic
– UV- & water resistant
– Bridge hairline cracks
– Hides minor inperfections
– Flexible
– Almost odourless
– Low VOC
– Walls
– Facias
FlexiTex is a fine texture, pure acrylic, UV-protected, dust – , dirt – and water resistant, low sheen coating. FlexiTex is highly flexible, bridge hairline cracks, hides minor imperfections and can be applied with an extra 2sqm per 1litre per coat compared to traditional texture coatings.
General Preparations
All surfaces must be clean, sound and dry.
Remove all loose flakes and apply WallPrime, to obtain a stable surface.
Even-out imperfections with WallSkim and fill cracks with WallFill.
To stabilize chalky surfaces, apply WallPrime.
Previously painted sound surfaces can be washed with sugar soap and rinse thoroughly with clean water.
To ease application, sand previously painted stable surfaces.
For water damaged, porous and alkaline surfaces, Apply WallPrime, to stabilize surface.
Remove rust on mild steel and galvanize. Apply HydroEtch/AllPrime, to stabilize surface. If rust cannot be removed completely, spot prime with a rust converter before application of primer.
Before recoating, sand previously varnished surfaces well to remove mirror-like image to a flat film.