Laminin Coatings Laminin Coatings


Spreading Rate: 3Kg/m2

Water based Interior & Exterior
Package size: 1L = 1.5Kg, 5L = 7.5Kg, 20L = 30Kg
Plaster skim
Easy application
Quick drying
Excellent adhesion
Even out imperfections
Bridge hairline cracks
Low dust when sanding
No primer required
Multi-purpose (cement, gypsum & wood)

Pre-mixed, quick dry, emulsion based skimming compound. Promotes good adhesion for ease of application. WallSkim has been formulated to even out imperfections, bridge hairline cracks and is tough and flexible for interior and exterior use. It copes well under normal temperature expansion and contraction. Do not apply thicker than 2mm. ProBuild promotes low dust with sanding and can be over coated without the use of a primer.

General Preparations

All surfaces must be clean, sound and dry.
Remove all loose flakes and apply WallPrime, to obtain a stable surface.
Even-out imperfections with WallSkim and fill cracks with WallFill.
To stabilize chalky surfaces, apply WallPrime.
Previously painted sound surfaces can be washed with sugar soap and rinse thoroughly with clean water.
To ease application, sand previously painted stable surfaces.
For water damaged, porous and alkaline surfaces, Apply WallPrime, to stabilize surface.
Remove rust on mild steel and galvanize. Apply HydroEtch/AllPrime, to stabilize surface. If rust cannot be removed completely, spot prime with a rust converter before application of primer.
Before recoating, sand previously varnished surfaces well to remove mirror-like image to a flat film.