A preparatory coating to be applied directly to new or weathered substrates. The deep penetrating properties will create an inter-locking mechanism for proper adhesion between surfaces and total paint system. An etch primer should be applied to non-penetrating, low energy substrates.
– Water Based – Solvent/Oil Based
Apply @ 8-10sqm/L per coat
Features
- Acrylic primer, sealer and undercoat.
- Penetrating primer that seals dry and porous cementitious substrates to provide a sound surface.
- Good alkaline resistance.
- Excellent opacity and overcoating ability.
- Water based alternative to traditional alkyd based plaster primer.
Where to use
- Dry and porous stable cement plaster, concrete, brickwork, fibre-cement and gypsum plaster.
Apply @ 10sqm/L per coat
Features
- Moisture tolerant alkyd plaster primer for interior and exterior.
- Deep penetrating barrier coat that resists the movement of water and dissolved salts.
- Preserves the integrity of the substrate by resisting the loss of soluble salts.
- Protects the paint film against the effects of penetrating and rising damp, efflorescence and peeling.
- Excellent opacity and overcoating ability.
- The root cause of moisture must be addressed before application of DamCure. Not suitable for surfaces where recurring moisture is present.
- Moisture tolerant up to 30%, allows for earlier priming of new cement plaster.
- Provides a sound surface for long term stability.
Where to use
- Stable cement plaster, concrete, brickwork and fibrecement.
Apply @ 8-10sqm/L per coat
Features
- Penetrating alkyd primer, sealer and undercoat.
- Direct application to dry and porous cementitious substrates to provide a sound surface.
- Chalk-, lime- and alkaline resistant.
- Good adhesion and overcoating ability.
Where to use
- Dry and porous stable cement plaster, concrete, brickwork, fibre-cement and gypsum plaster.
Apply @ 10sqm/L per coat
Features
- Penetrating moisture tolerant alkyd / solvent plaster primer.
- Direct application to dry and porous cementitious substrates to provide a sound surface.
- Chalk-, lime- and alkaline resistant.
- Excellent adhesion and overcoating ability.
Where to use
- Dry and porous stable cement plaster, concrete, brickwork, fibre-cement and gypsum plaster.
Apply @ 10-12sqm/L per coat
Features
- Deep penetrating moisture tolerant alkyd bonding liquid.
- Excellent adhesion.
- Chalk-, lime and alkaline resistant.
- Provides a sound surface for long term stability.
Where to use
- Masonry, concrete, gypsum board, gypsum plaster and fibre cement.
Apply @ 10sqm/L per coat
Features
- Normal dry rust resistant alkyd primer and undercoat.
- Etching primer for mild steel surfaces.
- Formulated with activated zinc phosphate as anticorrosive additive for long term durability and stability.
- Excellent overcoating ability.
Where to use
- Stable mild steel.
Apply @ 7-8sqm/L per coat
Features
- Quick dry rust resistant alkyd primer and undercoat.
- Etching primer for mild steel surfaces.
- Formulated with activated zinc phosphate as anticorrosive additive for long term durability and stability.
- Excellent overcoating ability.
Where to use
- Stable mild steel.
Apply @ 8sqm/L per coat
Features
- Deep penetrating alkyd wood primer, sealer and undercoat.
- Excellent overcoating ability.
- Long term stability.
Where to use
- Hard wood, soft wood and chipboard.
A high pigmented coating to be applied over primer for film-build. Apply over previously painted stable surfaces to improve opacity and adhesion.
– Water Based – Solvent/Oil Based
Apply @ 6sqm/L per coat
Features
- High hiding high PVC PVA.
- High build coating that is easy to sand.
- Universal undercoat over previously painted acrylic systems.
Where to use
- Walls & ceilings: suitably primed and previously painted stable cement plaster, concrete, porous brickwork, fibre-cement and gypsum plaster.
Apply @ 10sqm/L per coat
Features
- Excellent block and overcoating ability.
- Dries to a smooth high build film with good levelling.
- Easy to sand.
- Promotes intercoat adhesion.
- Excellent opacity and stain locking properties.
Where to use
- Intercoat over previously painted stable alkyd and acrylic systems.
- Barrier coat to block-out dark and bright colours before recoating.
- Stain locking over water damaged and soot marks.
Apply @ 10-14sqm/L per coat
Features
- Good block and overcoating ability.
- Promotes intercoat adhesion.
- Easy to sand.
Where to use
- Intercoat over previously painted stable alkyd and acrylic systems.
- Barrier coat to block-out dark and bright colours before recoating.
Top Coats provide the decorative, protective and informative features. Selection of top coat must be according to purpose and expectation.
– Water Based – Solvent/Oil Based
Apply @ 8sqm/L per coat
Features
- Alkyd eggshell enamel.
- Dries to a matt finish.
- Good flow and levelling.
- Highly durable.
- For interior use.
Where to use
- Interior walls & ceilings: suitably primed new and previously painted stable cement plaster, concrete, porous brickwork, various types of building boards, and gypsum plaster.
- Interior suitably primed new and previously painted stable mild-, galvanised steel and wood.
Top Coats provide the decorative, protective and informative features. Selection of top coat must be according to purpose and expectation.
– Water Based – Solvent/Oil Based
Apply @ 4-6sqm/L per coat
Features
- Matt texture finish.
- Bridge fine hairline cracks.
- Hides minor imperfections.
- UV and moisture resistant.
Where to use
- Suitably primed new and previously painted stable cement plaster, concrete, porous brickwork, fibrecement and gypsum plaster.
Apply @ 4-5sqm/L per coat
Features
- Good flexibility for exterior stability.
- High build waterproofing topcoat.
- Prevents moisture ingress.
Where to use
- Walls: suitably primed new and previously painted
stable cement plaster, concrete, porous brickwork,
various types of building boards, fibre-cement and
gypsum plaster. - Areas exposed to direct moisture and high humidity.
Apply @ 6-8sqm/L per coat
Features
- Dries to a smooth matt finish.
- Colourfast.
- UV and moisture resistant.
- Direct application to dry and stable paving. Regular
maintenance coats might be required depending on
traffic and conditions. - Quality guarantee does not apply to application on
floors, paving and pots.
Where to use
- Suitably primed new and previously painted stable
galvanised, tile and clay pitched roofs. - Dry cementitious paving, cobble stones and garden pots.
Top Coats provide the decorative, protective and informative features.
Selection of top coat must be according to purpose and expectation.
– Water Based – Solvent/Oil Based
Apply @ 10sqm/L per coat
Features
- Non yellowing water based gloss for multiple surfaces.
- Mold and fungal resistant for areas exposed to moisture and humidity.
- Dries to a hard and stain resistant film for surfaces where extra durability is required.
Where to use
- Interior walls & ceilings: suitably primed new and previously painted stable cement plaster, concrete, porous brickwork, various types of building boards, fibre-cement and gypsum plaster.
- Interior and exterior suitably primed new and previously painted stable mild-, galvanised steel and wood.
- Ideally suited for walls, doors, trims, kitchens and bathrooms.
Apply @ 7-10sqm/L per coat
Features
- Smooth silk sheen finish.
- Flexible waterproofing properties ideal for exterior use.
- Fully washable and stain resistant for interior surfaces.
- Low odour for ease of application.
Where to use
- Walls: suitably primed new and previously painted stable cement plaster, concrete, porous brickwork, various types of building boards, wood, fibre-cement and gypsum plaster.
Apply @ 6-10sqm/L per coat
Features
- Walls & ceilings top coat.
- Interior – dries to a smooth ultra matt finish that hides minor imperfections.
- Washable – can be wiped with a damp cloth and allow to dry. Do not scrub or abrade.
- Exterior – not recommended for areas exposed to regular moisture or rainfall.
- High PVC coating with a low moisture uptake. Moisture will evaporate without damage to the film.
Where to use
- Walls & ceilings: suitably primed new and previously painted stable cement plaster, concrete, porous brickwork, various types of building boards, wood, fibre-cement and gypsum plaster.
Apply @ 8-10sqm/L per coat
Features
- General purpose gloss enamel.
- Dries to a medium gloss finish.
- Interior and exterior use.
- Hard and durable, heavy duty coating.
- Good flow and levelling.
- UV resistant.
Where to use
- Walls, trims & ceilings: suitably primed new cement plaster, concrete, porous brickwork, various types of building boards, wood, mild-, galvanised metals and gypsum plaster.
- For areas where hard wearing and block resistance is required.
Apply @ 6-7 sqm/L per coat
Features
- General purpose gloss enamel.
- Dries to a low gloss finish.
- Interior and exterior use.
- Hard and durable, heavy duty coating.
- Good flow and levelling.
Where to use
- Walls, trims & ceilings: suitably primed new cement plaster, concrete, porous brickwork, various types of building boards, wood, mild-, galvanised metals and gypsum plaster.
- For areas where hard wearing and block resistance is required.
Apply @ 10sqm/L per coat
Features
- Non-drip alkyd enamel.
- Dries to a satin finish.
- Hard and durable polyurethane based coating.
- Excellent flow and levelling.
- Quality guarantee does not apply to exterior applications.
Where to use
- Interior walls & ceilings: suitably primed new and previously painted stable cement plaster, concrete, porous brickwork, various types of building boards, and gypsum plaster.
- Interior suitably primed new and previously painted stable mild-, galvanised steel and wood.
– Water Based – Solvent/Oil Based
Apply @ 8sqm/L per coat
Features
- Normal dry stoep enamel.
- Direct application to most stable substrates.
- Good flow and levelling.
- Dries to a smooth gloss finish.
- Hard and durable.
- Medium duty coating for household use.
Where to use
- Stable concrete and cementitious substrates i.e. floors, stairs, windowsills etc.
Apply @ 12-16sqm/L per coat
Features
- Protective silver alkyd enamel coating.
- Dries to a flexible low gloss finish.
- Heavy duty UV resistant coating.
- Good anti corrosive and rust resistant properties.
- Excellent ponding capability.
Where to use
- Direct application to new and previously painted stable mild-, galvanised steel and cementitious substrates where there is no direct handling of the paint surface required.
- For flat and pitched surfaces.
- Direct application over bituminous sealers and products.
- Not for use in water storage tanks or ponds with aquatic life.
Apply @ 10sqm/L per coat
Features
- General purpose quick dry alkyd enamel.
- Dries to a gloss finish.
- Heavy duty coating.
Where to use
- Suitably primed new and previously painted stable mild-, galvanised steel and wood.
Apply @ 4-8sqm/L per coat
Features
- Interior and exterior use.
- Weather resistant and water repellent.
- Penetrating brick dressing.
- Dries to a protective gloss finish.
- Enhances natural colour.
- Not recommended for walls where opposite side water penetration is likely.
Where to use
- Porous vertical facebrick.
Apply @ 2-3sqm/L per coat
Features
- Interior and exterior use.
- UV and weather resistant.
- Penetrating slasto and stone sealer.
- Dries to a protective gloss finish.
- Enhances natural colour.
- Highly durable.
Where to use
- Porous slasto, stone, quarry tile, sandstone, facebrick and concrete.
Block the pores in concrete and forms an impermeable layer to reduce the passage and absorption of moisture
– Water Based – Solvent/Oil Based
Apply @ 4sqm/L per coat
Features
- Flexible fibre reinforced acrylic waterproofing.
- May be used with membrane when sealing roofs.
- For parapets and walls apply in a criss-cross pattern to improve bridging of fine hairline cracks.
- Not recommended for ponding or negative water pressure areas.
- Overcoat with Roof&Pave or Apex for long-term durability.
- Do not coat over bitumen products.
Where to use
- Properly prepared pitched tile and galvanized iron roofs.
- Stable plastered walls and parapets.
DISTRIBUTION CENTRES
FREE STATE / NORTHERN CAPE / NORTH WEST
051 433 1960 | 051 447 9413
WESTERN CAPE / EASTERN CAPE | 021 851 0337
GAUTENG | 074 444 4461
