– Solvent based Interior & Exterior
– Normal dry floor alkyd
– Gloss finish
– Good flow and leveling
– Direct application
FloorAlkyd is an interior and exterior normal dry, medium duty floor coating with good flow and levelling properties. Formulated for direct application to stable concrete and cement floors. Floor Alkyd is alkali-resistant and dries to a smooth gloss finish.
All surfaces must be clean, sound and dry.
Remove all loose flakes and apply WallPrime, to obtain a stable surface.
Even-out imperfections with WallSkim and fill cracks with WallFill.
To stabilize chalky surfaces, apply WallPrime.
Previously painted sound surfaces can be washed with sugar soap and rinse thoroughly with clean water.
To ease application, sand previously painted stable surfaces.
For water damaged, porous and alkaline surfaces, Apply WallPrime, to stabilize surface.
Remove rust on mild steel and galvanize. Apply HydroEtch/AllPrime, to stabilize surface.
If rust cannot be removed completely, spot prime with a rust converter before application of primer.
Before recoating, sand previously varnished surfaces well to remove mirror-like image to a flat film.